0.15 mm SQUISH base gasket – Honda Wallaroo / Peugeot Fox & 103
This 0.15 mm base gasket for Honda Wallaroo and Peugeot Fox/103 is used to fine-tune the squish and combustion chamber volume.
Produits
Intake gasket manifold / reed valve block – Kawasaki AR50 & AR80
This OPUS gasket fits between the intake manifold and the reed valve block on Kawasaki AR50 and AR80, sealing this junction that is essential to proper intake operation.
Opus intake gasket – Kawasaki AR50 / AR80 (cylinder – reed valve block)
Intake gasket fitted between the cylinder and the reed valve block on Kawasaki AR50 and AR80, a faithful reproduction of the original part.
Opus fork riser set – Honda Camino (+35 mm)
Set of original-fork risers for the Honda Camino, adding +35 mm by sitting above the inner tubes.
Opus crankshaft spacer – Peugeot Fox, oil pump delete
Crankshaft spacer for Peugeot Fox, allowing the original oil pump drive pulley to be removed. Made from rust-treated steel.
Opus gasket set – Big Valve reed valve block, Peugeot Fox
Set of two gaskets for the Opus Big Valve reed valve block for Peugeot Fox, spare part for item OP244.
Opus universal silencer mounting end – 50 cc
Universal silencer mounting end for 50 cc exhausts: 18 mm inner diameter, 20 mm outer diameter, 38 to 40 mm mounting hole spacing.
Opus 2 mm offset spacer – 12V ignition on Dax 6V crankcase
2 mm thick aluminium spacer from Opus, allowing a 12-volt (NT) ignition to be fitted to an original 6-volt (OT) Honda Dax ST50/ST70, CT50/CT70, Monkey, Chaly, SS or Gorilla crankcase.
Gearbox output sprocket offset Opus – Daytona Anima 190 & Zongshen 190/212
Opus gearbox output sprocket offset kit for Mini 4-strokes with Daytona Anima or Zongshen 190/212 cc electric-start engines, required once the wheel exceeds 4.0 in width. It offsets the sprocket by 18 or 26 mm.